There are 8 steps to upgrading the firmware:1. Unzip the upgrade package to the USB disk on PC,and there will be 3 files in the root of the SD card as follow:Notices: (1) Do not make any changes to these 3...
1.Make sure there is a male-to-male USB cable2.Install the upgrading tool on PC3.Load the firmware4.Insert a toothpick into the AV port where is reset button,and keep the button pressed5.Using the male-to-male USB cable to connect TV BOX with PC,then as...
There are 5 steps to upgrading the firmware:1. Unzip the upgrade package to the SD card on PC(or Micro SD card depending on the model of TV BOX),and there will be 3 files in the root of the SD card...
